Motocross – Grips Bikes

Stomp Mini Pit 65 Pit Bike

Matt Kyle — Mon, 06 Dec 2021 16:46:59 +0000

Due to popular demand, the Minipit is back. This time she’s smaller and more perfectly formed. Fitted with a fully auto 60cc engine. A high spec entry level bike which will hold her head up in any paddock.

Good deliverable power aimed at the mini-racer. Packed with high spec parts and built to be light, this is the best little bike we have produced to date.

Specification:

Fully auto ZS 60cc engine
1.5hp / 7000rpm
Electric start
Restricted to 20 mph
Stealth ‘quiet’ exhaust system
light-weight steel spine frame
Conventional oil filled forks with strong steel triple clamps
Adjustable pre-load shock
Specially designed short length mx style swing arm
Lightweight hubs with 10/10″ alloy rims
Quality off-road trail tyres 2.50-10
Composite fuel tank
New MP65 Hi impact polypropylene plastics
3M Stomp Race graphics with Stomp race sponsor logos
Light-weight steel bars
Small levers for front & rear brakes
Cable operated disk brakes with light weight rotors
Weight limit 9 stone
Dry weight 42kg
Seat height of 56cm
Ground clearance 17cm
lithium battery
lithium battery. (Please note these cannot be charged with a standard battery charger; lithium specific is required)Colours and specification are subject to change without notice
All pit bikes come with a 30 day parts only warranty.

If delivery is required, call 01268 776661

Stomp Juice Box 110 Pit Bike

Matt Kyle — Mon, 06 Dec 2021 16:43:05 +0000

Welcome to the Generation 3 juicebox, this time specifically designed with those who are vertically challenged in mind. We have done away with all the fancy stuff and decided to give you exactly what you’ve been asking for: a small pit bike suitable for small people at a reasonable price. Although small, the Juicebox3 is perfectly formed and incredibly tough and durable.

Taking its geometry from the Honda CRF50, with low sculpted seat and 12/10 wheels, the JB3 sits at only 64 cm off the ground, perfect for any beginner or BIG KID alike (the JB3 will take a rider up to 9 stone). Updated with new Stomp Race graphics and new PRO footpegs.

Specification:

Bullet proof Lifan 110 cc semi auto 4 speed all-up gearbox
Stealth ‘quiet’ exhaust system
light-weight steel spine frame
Conventional oil filled forks with strong steel triple clamps
Adjustable pre-load shock
Specially designed short length mx style swing arm
SDG hubs with 12/10″ steel rims
Quality off-road trail tyres
Composite fuel tank
Hi impact polypropylene plastics
Light-weight steel bars
Fold back brake lever
Hydraulic disk brakes with light weight rotors
Updated juicebox3 3-m Stomp Race graphics with Stomp race sponsor logos
Updated PRO footpegs
Weight limit 9 stone
Seat height of 64cm

If delivery is required, call 01268 776661

Stomp FXJ 110 Pit Bike Semi-auto

Matt Kyle — Mon, 06 Dec 2021 16:34:06 +0000

The perfect entry level bike for field hackers and back yard bashers. The Stomp 110 FXJ packs a punch and puts a smile on your face! New TS plastics have transformed this old classic which started in 2007 to give it a new look for 2020 and beyond. Put it on your wish list now.

Specification:

Bullet proof Lifan 110cc manual engine with all-up gearbox
19mm carb with double foam filter
Aluminium shot blast finished cases with Stomp logo
Stylish stealth race exhaust
Light-weight steel spine frame
Revised light-weight tig welded 390mm swing arm
Conventional oil filled forks with strong steel triple clamps
Stronger revised 280mm shock with steel bushes
14/12 sdg wheels with steel rims
Superb durable and tough innova pattern mx tyres
Improved and revised light-weight brake master cylinders and calipers
Vented light-weight rotors 210/180mm
Mandrill bent big bore 28mm race pipe
Pro-taper style minibike bars
Forged alloy clutch & brake levers
420 KMC chain with engraved alloy/nylon chain guide
420 41t lightweight durable rear sprocket
Fold back gear selector
NEW upgraded PRO footpegs
NEW reinforced poly resin 5.5 ltr fuel tank
NEW revised firmer seat with Stomp logo
NEW Hi impact TS polypropylene plastics
New Stomp race graphics kit with Stomp race sponsor’s logos
Seat height 73cm
Dry weight 64kg
Weight limit 15 stone

If delivery is required- call 01268 776661

Stomp Z3-140 Pit Bike

Matt Kyle — Mon, 06 Dec 2021 16:19:22 +0000

The Z3-140 still boasts the ‘exclusive to Stomp’ SR140C Z40 cam engine. Stomp buy in the YX140 and then fettle the engine with stiffened valve springs & a high lift race cam (known as the Z40 cam). The result is 2hp more than any other YX140 engine on the market. It might not be quite Zhongshen 155 territory but its most of the way there and significantly cheaper to install than the ZS155. If you look after the SR140C, it will prove a very reliable and cheap engine to run.

The new look Z3-140 also comes with updated pro foot pegs and polished hubs to complete the new look.

Specification:

Stomp Racing SR140C Z40 race cam
Start-in-gear, all-up 4 speed gearbox
14hp at rear wheel
26mm race carb with double foam filter
Aluminium shot blast finished cases with Stomp logo
CNC oil cooler with braided steel hoses
SDG2 heavy duty cradle frame for ultimate stiffness and control
Removable rear subframe & bolt on engine hangers
Revised light-weight tig welded 430mm swing arm
Entended 735mm cnc machined usd oil filled forks
Drop forged black anodised triple clamps (yokes)
Nitrogen filled 290mm piggy back shock with steel bushes
14/12 sdg wheels with steel rims for strength
Superb durable and tough innova pattern mx tyres
Improved and revised light-weight brake master cylinders and calipers
Vented light-weight rotors
Alloy oval exhaust muffler
Mandrill bent big bore 32mm OD race pipe
Features full length alloy heat shield for style and protection
Pro-taper style minibike bars
Renthal style soft rubber grips
Forged alloy clutch & brake levers
420 KMC chain with engraved alloy/nylon chain guide
420 41t lightweight durable rear sprocket
420 16t front sprocket
Fold back gear selector
NEW upgraded PRO footpegs
NEW reinforced poly resin 5.5 ltr fuel tank with alloy cnc filler cap
NEW revised firmer seat with Stomp logo
NEW Detroit hi impact polypropylene plastics
Wrap around crf number board with front brake pipe tidy
New Stomp race graphics kit with Stomp race sponsor’s logos
Seat height 82cm
Dry weight 71kg
Weight limit 15 stoneColours and specification are subject to change without notice
All pit bikes come with a 30 day parts only warranty.

If delivery is required, call 01268 776661

Stomp Z3-160 Pit Bike

Matt Kyle — Sat, 18 Apr 2020 15:44:46 +0000

The Z3-160 is the most powerful Stomp pit bike in the range. Packing 17hp at the rear wheel, this is a serious bit of kit and not for the faint hearted. Comes with big 17/14 wheels.

The ZS155 engine, although more expensive, has proven to be as reliable as its smaller YX140 counterpart. It also boasts the upgraded SDG2 frame and the Detroit plastics, as well as the updated PRO foot pegs and polished hubs. Giving a massive 17hp at the rear wheel, the ZS155 engine is a force to be reckoned with. Reliability and power make this all round awesome bike. Ready to race your mates, straight out of the crate, this bike is a sure winner!

Specification:

Zhongshen 155cc
Start-in-gear, all-up 4 speed gearbox
17hp at rear wheel
26mm race carb with double foam filter
Aluminium shot blast finished cases with Stomp logo
Race oil cooler with braided steel hoses
SDG2 heavy duty cradle frame for ultimate stiffness and control
Removable rear subframe & bolt on engine hangers
Revised light-weight tig welded 430mm swing arm
Entended 735mm cnc machined usd oil filled forks
Drop forged black anodised triple clamps (yokes)
Nitrogen filled 290mm piggy back shock with steel bushes
17/14 sdg wheels with steel rims for strength
Superb durable and tough innova pattern mx tyres
Improved and revised light-weight brake master cylinders and calipers
Vented light-weight rotors
Alloy oval exhaust muffler
Mandrill bent big bore 32mm OD race pipe
Features full length alloy heat shield for style and protection
Pro-taper style minibike bars
Renthal style soft rubber grips
Forged alloy clutch & brake levers
Stomp logo cnc machined engine side cases
420 KMC chain with engraved alloy/nylon chain guide
420 41t lightweight durable rear sprocket
420 16t front sprocket
Fold back gear selector
NEW upgraded PRO footpegs
NEW reinforced poly resin 5.5 ltr fuel tank with alloy cnc filler cap
NEW revised firmer seat with Stomp logo
NEW Detroit hi impact polypropylene plastics
Wrap around crf number board with front brake pipe tidy
New Stomp race graphics kit with Stomp race sponsor’s logos
Dry Weight 71kg
Weight limit 15 stone

If delivery is required- call 01268 776661

Stomp Z3-140 Big Wheel Pit Bike

Matt Kyle — Sat, 18 Apr 2020 15:38:59 +0000

The Z3-140 Big Wheel still boasts the ‘exclusive to Stomp’ SR140C Z40 cam engine. Stomp buy in the YX140 and then fettle the engine with stiffened valve springs & a high lift race cam (known as the Z40 cam). The result is 2hp more than any other YX140 engine on the market. It might not be quite Zhongshen 155 territory but its most of the way there and significantly cheaper to install than the ZS155. If you look after the SR140C, it will prove a very reliable and cheap engine to run. With new stunning neon yellow race graphics The new look Z3-140 also comes with updated pro foot pegs and polished hubs to complete the new look.

Specification:

Stomp Racing SR140C Z40 race cam
Start-in-gear, all-up 4 speed gearbox
14hp at rear wheel
26mm race carb with double foam filter
Aluminium shot blast finished cases with Stomp logo
CNC oil cooler with braided steel hoses
SDG2 heavy duty cradle frame for ultimate stiffness and control
Removable rear subframe & bolt on engine hangers
Revised light-weight tig welded 430mm swing arm
Extended 735mm cnc machined usd oil filled forks
Drop forged black anodised triple clamps (yokes)
Nitrogen filled 290mm piggy back shock with steel bushes
17/14 sdg wheels with steel rims for strength
Superb durable and tough innova pattern mx tyres
Improved and revised light-weight brake master cylinders and calipers
Vented light-weight rotors
Alloy oval exhaust muffler
Mandrill bent big bore 32mm OD race pipe
Features full length alloy heat shield for style and protection
Pro-taper style minibike bars
Renthal style soft rubber grips
Forged alloy clutch & brake levers
420 KMC chain with engraved alloy/nylon chain guide
420 41t lightweight durable rear sprocket
420 16t front sprocket
Fold back gear selector
NEW upgraded PRO footpegs
NEW reinforced poly resin 5.5 ltr fuel tank with alloy cnc filler cap
NEW revised firmer seat with Stomp logo
NEW Detroit hi impact polypropylene plastics
Wrap around crf number board with front brake pipe tidy
New Stomp neon yellow race graphics kit with Stomp race sponsor’s logos
Seat height 82cm
Dry weight 71kg
Weight limit 15 stone

If delivery is required- call 01268 776661

Stomp Z3R-140 Pit Bike

Matt Kyle — Sat, 18 Apr 2020 15:31:25 +0000

The Z3R-140 is the ultimate budget race bike from the Stomp stable. This bike boasts the upgraded SDG2 frame and the Detroit plastics, as well as the suspension from its podium-winning predecessor. The best 140 pit bike out there.

The Z3R-140 still boasts the ‘exclusive to Stomp’ SR140C Z40 cam engine. Stomp buy in the YX140 and then fettle the engine with stiffened valve springs & a high lift race cam (known as the Z40 cam). The result is 2hp more than any other YX140 engine on the market.

Stomp have picked up numerous podiums in 2016 with its predecessor, the Z2-R-140 and this bike will give Stomp the edge in the 2017 race series.

Specification:

Stomp Racing SR140C Z40 race cam
Start-in-gear, all-up 4 speed gearbox
14hp at rear wheel
26mm race carb with double foam filter
Aluminium shot blast finished cases with Stomp logo
CNC oil cooler with braided steel hoses
SDG2 heavy duty cradle frame for ultimate stiffness and control
Removable rear subframe & bolt on engine hangers
Alloy sump guard / bash plate
410mm alloy swing arm
SP 735mm cnc machined usd fully adjustable oil filled forks
Drop forged black anodised triple clamps (yokes)
DNM nitrogen filled 290mm piggy back shock
14/12 sdg wheels with steel rims for strength
rim lock in rear wheel
Kenda tyres
Improved and revised light-weight brake master cylinders and calipers
Vented light-weight rotors
Brake snake to protect the rear brake pedal
Alloy oval exhaust muffler
Mandrill bent big bore 32mm OD race pipe
Features full length alloy heat shield for style and protection
Pro-taper style minibike bars
Renthal style soft rubber grips
Forged alloy clutch & brake levers
Stomp logo cnc machined engine side cases
420 KMC chain with engraved alloy/nylon chain guide
420 41t lightweight durable rear sprocket
420 16t front sprocket
Fold back gear selector
NEW upgraded PRO footpegs
NEW reinforced poly resin 5.5 ltr fuel tank with alloy cnc filler cap
NEW revised firmer seat with Stomp logo
NEW Detroit hi impact polypropylene plastics
Wrap around crf number board with front brake pipe tidy
New Stomp race graphics kit with Stomp race sponsor’s logos
Seat height 85cm
Dry Weight 71kg
Weight limit 15 stone

If delivery is required- call 01268 776661

Stomp Superstomp 120R Pit Bike

Matt Kyle — Sat, 18 Apr 2020 15:12:21 +0000

The all NEW SuperStomp 120R has arrived! Fitted with the same punchy Lifan 120cc engine with all-up gearbox, it’s the perfect entry level bike for all ages but can easily be modified for track use.
Upgraded with the new SDG2 frame, Detroit plastics & fitted with new Stomp race graphics, it has a big bike look but the seat height remains the same.It also features upgraded PRO footpegs for ultimate grip & control. Attention to detail gives this bike the edge over the competition, like the addition of the polished hubs for that classy look.

Fitted with the Lifan 120, this bike has come a long way since the 110cc version in 2006, it became Stomp’s best selling bike in 2015 has just had a major re-design. Still compact, although it looks & rides like a bigger bike!

Specification:

SR120 Lifan manual engine with all-up gearbox
8.5hp at rear wheel
22mm carb with double foam filter
Aluminium shot blast finished cases with Stomp logo
SDG2 heavy duty cradle frame for ultimate stiffness and control
Removable rear subframe & bolt on engine hangers
Revised light-weight tig welded 390mm swing arm
Drop forged triple clamps (yokes)
Stronger revised 280mm shock with steel bushes
Extended cnc machined usd 660mm forks
14/12 sdg wheels with steel rims
Superb durable and tough innova pattern mx tyres
Improved and revised light-weight brake master cylinders and calipers
Vented light-weight rotors 210/180mm
Mandrill bent big bore 28mm race pipe
Alloy thumper exhaust muffler
Pro-taper style minibike bars
Forged alloy clutch & brake levers
Stomp logo cnc machined engine side cases
420 KMC chain with engraved alloy/nylon chain guide
420 41t lightweight durable rear sprocket
Fold back gear selector
NEW upgraded PRO footpegs
NEW reinforced poly resin 5.5 ltr fuel tank
NEW revised firmer seat with Stomp logo
NEW Detroit flat panel polypropylene plastics
New Stomp race graphics kit with Stomp race sponsor’s logos
Seat height 73cm
Dry weight 64kg
Weight limit 15 stone

If delivery is required- call 01268 776661

Thor Clinch Motocross Body Belt Black/White

admin — Fri, 09 Dec 2016 13:59:54 +0000

Thor Clinch Motocross Body Belt
- - Low profile perforated TPR hook & loop closure tabs 4 centre-pull elastic support straps
  - Exhaust ports to allow heat to escape
  - Anatomically derived moulded bio-foam
  - High density moulded thermoplastic rubber mainstay for support
  - Moisture wicking interior with extensive padding
  - Fits waist sizes S/M 28 – 36 inches, L/XL 36 – 44 inches

Thor MX Sentinel GP Motocross Body Armour Adult

admin — Fri, 09 Dec 2016 11:18:56 +0000

Thor MX Sentinel GP Motocross Body Armour Adult
Injection moulded with Bio-foam interior Designed specifically for off-road riding Slim profile fits under a jersey.The most popular body armour in the world, very slim snug fit, fits perfectly with Leatt and Alpinestar neck braces.NO LONGER COMES WITH REMOVABLE BACK PLATE